How
the Bolt Lock Works
| |
|
|
| 1. |
Take
a bolt out anywhere on your
bike. Replace it with an equivalent
socket head cap screw. Slide
it through our washer, use
loctite
on the threads and secure the
washer to the motorcycle. |
|
|
|
| |
Washer
to left secured to foot peg
bolt. |
|
|
|
|
| 2..
|
Insert
the "L" shaped end
of the cable through the "D"
rings, webbing or face of a
helmet, or with the longer cables
run it up the sleeve of a jacket
or accessories then back through
the other end of the cable,
then into the slot of either
side of the Bolt Lock. |
| 2b. |
When
you insert the end into the
slot rotate the end 90 deg.
so that the end is pointing
clockwise. Now turn the key
90 deg. Clockwise which locks
the cable to the Bolt Lock.
Next slide the Bolt Lock over
the flange on our washer as
shown to the left.
|
|
|
|
|
|
